Yamaha Portables 25 to 15 hp · Virginia Beach

Yamaha F20 outboard: specs, rigging and repower in Virginia Beach.

The F20 is a 362 cc SOHC two-cylinder built on the F25 platform, 126 lb with a 15-inch shaft. It is fuel-injected, adds an intake silencer and an acceleration pump, and lists a variable trolling range of 750 to 1050 RPM. Yamaha offers tiller and remote versions with manual or electric start in 15- and 20-inch shafts.

Horsepower
20 hp
Engine type
2 cyl
Displacement
362 cc
Shaft length
15" - 20"
Weight †
57 kg (126 lbs) - 66 kg (146 lbs)
Yamaha
Yamaha Portables 25 to 15 hp outboard family
Shown: the Yamaha Portables 25 to 15 hp family.Outboard images: Yamaha Motor Corporation. Coastal Marine is an authorized Yamaha dealer and installs these outboards at its Shore Drive shop.

Specifications

Yamaha F20
specs, as Yamaha lists them.

Specs and features: Yamaha, read from yamahaoutboards.com and Yamaha's Engine Comparison tool on 2026-10-05. Yamaha can change a model by model year; we confirm the exact engine when we quote.

Yamaha F20 specifications
Weight †57 kg (126 lbs) - 66 kg (146 lbs)
Full Throttle RPM Range5000 ~ 6000 rpm
Fuel Induction SystemEFI
Recommended Engine OilYamalube® 4M (See owner's manual)
Engine Type2 cyl
Displacement362 cc
Bore x Stroke65 x 65.1mm (2.554 x 2.558 in)
Prop Shaft Horsepower20 hp @ 5500 rpm
Alternator Output at W.O.T.16 Amp
Compression Ratio9.3:1
Recommended FuelOctane 87
Recommended Fuel FiltrationYamaha 10-Micron Fuel/Water Separating Filter (external)
C.A.R.B. Rating2-Star
ExhaustThrough Propeller
Intake4
IgnitionCDI
Spark PlugDPR6EB-9
Starting SystemElectric & Manual
LubricationWet Sump
Engine Oil Capacity1.1L/1.0L
Recommended CoolingThermostatic Control
Ethanol Blend Limit10% Maximum
Gear Ratio2.00:1
Gear ShiftForward, Neutral, Reverse
Shaft Length15" - 20"
Degree of Tilt62°- 63°
Degree of Trim-3° through +16°
Mounting CentersN/A
Steering Angle (maximum)45° from center, either direction
WarrantyLimited 3-Year Pleasure, 3-Year Government, 1-Year Commercial
Variable Trolling RPM Range750 ~ 1050 rpm

† Weight refers to shortest shaft length, and is measured without motor oil, gearcase oil and propeller (except models 25 hp and under, which include a standard propeller). All Jet model weights include the jet pump assembly (weight estimated).

Rigging

Shaft lengths, controls
and Helm Master EX.

Shaft lengths

Yamaha lists: 15" - 20"

We confirm the right shaft for your transom before we quote.

Controls

Gauges

Yamaha lists Helm Master EX as not available for the F20.

F20 model codes

Yamaha F20 model codes from Yamaha's current model-code list
Model codeControlsColor
F20SMHBTiller handleGray
F20LMHBTiller handleGray
F20SWHBTiller handleGray
F20LWHBTiller handleGray
F20SWBRemote mechanicalGray
F20LWBRemote mechanicalGray
F20LWPHBTiller handleGray
F20SWPBRemote mechanicalGray
F20LWPBRemote mechanicalGray

Model codes from Yamaha's current model-code list. Ask us which code fits your boat; we confirm it when we quote.

Features

What's built into
the F20.

  • 362 cc 20 hp SOHC portable built on the F25 platform.
  • 126 lb with 15-inch shaft.
  • 15- and 20-inch shafts; 16-amp alternator.
  • CDI microcomputer ignition adjusts timing to throttle position, speed and conditions.
  • Pressurized wet-sump lubrication.
  • Warning system covers overheat, low oil pressure (2000 RPM limit), over-rev and start-in-gear.
  • Phaze Five anti-corrosion paint over YDC-30 alloy.
  • SOHC design with two valves per cylinder.
  • Balanced crankshaft and labyrinth exhaust for smooth running.
  • F20 and F15 add an intake silencer and an acceleration pump.
  • 45 degrees of steering in each direction.
  • Freshwater flush device works without running the engine.
  • Carry handles, resting pads and oil retention allow on-side storage; folding tiller optional.

Repower

Repowering with the F20
at Coastal Marine.

Coastal Marine is an Elite Yamaha dealer and an authorized Yamaha Repower Center on Shore Drive in Virginia Beach. A repower with the F20 takes the old or worn-out outboard off a sound hull, of any make, and puts the new Yamaha on, with the controls, gauges and rigging the new setup needs. Warranty work on the Yamaha power we install is authorized in-house.

We don't post engine prices. Tell us the boat, what's on the transom now and roughly how many hours it has, and we'll quote the F20 for it. Financing is available on repowers through Yamaha Financial Services.

Ready when you are.

Common questions

Yamaha F20
questions, answered.

Yamaha's spec table lists the F20 shaft length as 15" - 20". We confirm the right shaft for your transom before we quote.

Yamaha lists these compatible controls for the F20: Mechanical Controls and Multi-Function Tiller Handle. Not available: Helm Master® EX and Command Link Plus Digital Controls.

No. Yamaha lists Helm Master EX as not available for the F20.

Yamaha lists the weight of the F20 as 57 kg (126 lbs) - 66 kg (146 lbs). Yamaha's note on that figure: Weight refers to shortest shaft length, and is measured without motor oil, gearcase oil and propeller (except models 25 hp and under, which include a standard propeller). All Jet model weights include the jet pump assembly (weight estimated).

Yamaha's recommended fuel for the F20 is Octane 87, with an ethanol blend limit of 10% Maximum. Recommended engine oil: Yamalube® 4M (See owner's manual).

Get a quote
on new Yamaha power.

Tell us the boat, the engines on it now and roughly the hours, and we'll quote the F20 for it. We answer same business day.

Just leave a phone or an email — whichever's easier.

Call (757) 464-4600Text